How can 2-Dimensional (2D) chromatography help solve challenging HPLC separations and quantitation?
High Performance Liquid Chromatography (HPLC) has been an indispensable tool for analytical chemists for more than 40 years. It has helped with the separation and quantitation of trace level organic compounds in countless complex matrices due to various separation mechanisms (reverse phase and normal phase for example), numerous detector options (ELSD, RI, UV, Corona CAD) and others.
We’ve known HPLC to be used with a single column in most applications. But what about using two columns – with very different stationary phases?
Enter 2D HPLC: A way to dramatically increase separating power by injecting the effluent (or a part of the effluent) from one column onto a second column. In most cases, the second column will have complementary separation behavior.
There are two basic ways to perform 2D HPLC: Comprehensive 2D HPLC (or LCxLC) and Heart-cutting 2D HPLC (or LC-LC)
With LCxLC, the complete eluent of the first column is injected onto the second column. The peaks are reconstructed in a 2D manner as the following:
With LC-LC, a specific peak (or retention time range) from the first HPLC column is selected for a secondary separation on LC2. Compared with LCxLC, it is possible to achieve greater separation for a specific peak as the LC2 column can be selected to maximize separation efficiency for a specific peak in LC1 (e.g., a longer column).
Okay…what’s so great about 2D HPLC?
Firstly, 2D HPLC can be a “go to” method to eliminate time-consuming and costly sample preparation steps. This can be extremely valuable for a chemist when faced with the extremely difficult task of quantitation of trace level organic compounds in a complex matrix.
2D HPLC can also be used to monitor small changes in complex mixtures. This is accomplished by evaluating 2D maps of samples.
Overall, 2D HPLC can be a fully automated process and method development is greatly expedited with powerful software.
GLOBAL BOTTOM CTA INSTRUCTIONS:
To display custom copy instead of global copy in this section, please go to Show Global Content for Bottom CTA? toggle in the "Contents" tab to the left, toggle it off, save, and then REFRESH the page editor, the custom text will then show up and ready to be edited.
Turning the global content back on will be the same process, go to the toggle and toggle it back on, save and refresh!
United States HQ 2790 Mosside Blvd. United States (U.S.) |
Europe HQ 3rd Floor, 1 Ashley Road Altrincham, Cheshire, |
©2025 RQM+ All Rights Reserved | Privacy Policy | Cookies Policy